N7 :: tooth flank :: EMCOTEST

Portable hardness tester for testing the hardness of tooth flanks

All devices consist of test unit N1E 000 (complete with dial gauge, dialgauge cover and spring sleeve) with load lever, the measurement head with built-in spring joint, including hardness testing diamond and the clamping device. The standard design consists of a load level 62.5, HRC hardness value indicator, tool kit, hardness comparison table, device case and instruction manual.

Application N7F
External teeth module 2–10,
max. tooth measurement range 140 mm

Application N7P
External teeth module 3–35,
tooth measurement ranges max. 700 mm

Details

Achievements

Accessories

Technical data

Applications

Spur toothed flank testing

Tooth flank hardnesstester for spur toothed wheels
Application range between modul 2 - 35
Measurement value display for HRC
Not suitable for helical gear wheels (only possible with appropriate tooth width)

Operation:
The testing machine is positioned on the work piece and clamped to the requested test point. The test load is applied via hand lever. Subsequentlythe reading is taken from the dial gauge.

Intest tooth flank hardness tester, portable
for module 2 - 10
max. tooth measuring range 140 mm
pitch circle dia. 30 - max. 400 mm
with test unit N1E000
and test method HR 62.5
inclu. spring link with diamond
and dial gauge NMU000
measurement value indication in HRC

Tooth flank hardness tester, portable
modul 3 - 35
max. tooth measuring range 700 mm
pitch circle dia. up to 2000 mm
with test unit N1E000
with test method HR 62.5
inclu. spring link with diamond
and dial gauge NMU000
measurement value indication in HRC

Select your requested accessories! |

for N1 test units

for N1P test units

Test block HRA
with MPA certificate,
hardness value approx. 70

Test block HRB
with MPA certificate,
hardness value approx. 100

Test block HRC
with MPA certificate,
hardness value approx. 45

Test block HRC
with MPA certificate,
hardness value approx. 55

Test block HRC
with MPA certificate,
hardness value approx. 60

Test block HRC
with MPA certificate,
hardness value approx. 65

Model name

Test loads

Peculiarities

Test anvil

Size

Standard support

Drive (z-axis)

Traverse path cross slide

Accuracy X-/Y-axes*

Nose cone

Area of support

Drilling

Measurement turret

Drive test unit

Work piece size

Test height

Throat depth

Max. work piece weight

Camera, Lens, Lighting

Camera resolution

Halogen lamp

LED lighting

Field of view general image camera

Software

Dimensions

Display

Basic machine (whd)

Machine base

Weight basic machine

Electric connector

Power supply

Frequency

Power consumption

Main fuse 220V

Main fuse 110V

Terms

Room temperature

Relative humidity

Safety class

N7F

613 N
62.5 kgf

max. tooth measuring range 140 mm

340 x 320 x 60

5.4 kg

N7P

613 N
62.5 kgf

max. tooth measuring range 700 mm

890 x 480 x 60

7.8 kg

Products

N7

Extranet

Offer

Brochures