N4 | Portable :: Portable

Portalbe hardness tester:

The tester comprises the test unit N1A 001 inclusive demanded springsleeve or adjustable test unit and one of the light metalcast C clamps, with quick release spindle.

Operation:

The part to be tested is clamped between the anvil and the test head, after which the load is applied to the indentor. Subsequently the reading is taken from the dial gauge.

Details

Achievements

Accessories

Technical data

Applications

Use of load-selectable test unit
(test height reduce 55 mm, not useable for N4E)

N1P 000–for plastics testing to ENISO 2039-1
N1R 000–for Rockwell testing to EN ISO 6508 – 60, 100, 150
N1S 000–for Super Rockwell testing to EN ISO 6508 – 15, 30, 45

Test methods:

All Rockwell test methods acc. to EN ISO 6508, ASTM E-18
Test loads: 147 – 1471 N (15 – 150 kgf) exchangeable springsleeves
Test methods according not to standards in vickers and brinell according to HVD and HBD are possible in test load range 294 - 1839 N (30 - 187.5 kgf)

Portable
clamping width 0 - 145 mm
throat depth 85 mm
without test unit
without test method equipment
inclu. plane anvil dia. 35 mm and
V-anvil for work pieces dia. 20 - 250 mm

Portable
clamping width 0 - 235 mm
throat depth 130 mm
without test unit
without test method equipment
inclu. plane anvil dia. 35 mm and
V-anvil for work pieces dia. 20 - 250 mm

Portable
clamping width 0 - 335 mm
throat depth 180 mm
without test unit
without test method equipment
inclu. plane anvil dia. 35 mm and
V-anvil for work pieces dia. 20 - 250 mm

Portable
clamping width 0 - 20 mm
throat depth 110 mm
without test unit
without test method equipment
inclu. plane anvil dia. 17 mm

Select your requested accessories! |

Test unit for N3/N4 in connection with N2 spring sleeves with loads 15 - 187.5 kgf selectable
Rockwell, Brinell- and Vickers test method (depth difference measurement)

inclusive standard nose cone N1P K07
without Dial gauge NMU000

Vickers penetrator
with MPA - certificate
length: 28 mm
Ø 6.5 mm
(for >= HV 5)

for N1 test units

for test unit N1A 001
test load 147 N (15 kgf)

for Rockwell testing HRN and HRT (DIN EN ISO 6508)
test loads 147 / 294 / 441.5 N (15 / 30 / 45 kgf)
incl. standard nose cone N1PK07
(reduction of test height by 55 mm)

Test block HB 2.5/62.5
Hardness value approx. 100
with MPA certificate

Vickers penetrator
with MPA - certificate
length: 28 mm
Ø 3.8 mm
(for >= HV 5)

for test unit N1A 001
test load 294 N (30 kgf)

for Rockwell testing (DIN EN ISO 2039-1)
test loads 588.6 / 981 / 1471.5 N (60 / 100 / 150 kgf)
incl. standard nose cone N1PK07
(reduction of test height by 55 mm)

for N1P test units

Test block HB 2.5/62.5
Hardness value approx. 150
with MPA certificate

Vickers penetrator
with MPA - certificate
length: 14 mm
Ø 8 mm
(for nose cone N1PK01)

for test unit N1A 001
test load 306.5 N (31.25 kgf)

Test block HB 2.5/62.5
Hardness value approx. 200
with MPA certificate

Vickers penetrator
length: 14 mm
Ø 8 mm
(for nose cone N1PK01)

for plastics (DIN EN ISO 2039-1)
test loads 49 / 132.4 / 358 / 961.4 N (5 / 13.5 / 36.5 / 98 kgf)
incl. standard nose cone N1PK07
(reduction of test height by 55 mm)

for test unit N1A 001
test load 441.5 N (45 kgf)

for test unit N1A 001
test load 588.6 N (60 kgf)

for test unit N1A 001
test load 613 N (62.5 kgf)

for test unit N1A 001
test load 981 N (100 kgf)

for test unit N1A 001
test load 1471.5 N (150 kgf)

Nose cone
support dia. 19.5 mm
drilling: 12 mm
length: 13.5 mm

for test unit N1A 001
test load 1839.4 N (187.5 kgf)

Nose cone standard
support dia. 15 mm
drilling: 8 mm
length: 27.5 mm

Nose cone
support dia. 12 mm
drilling: 7 mm
length: 100 mm

inclusive penetrator elongation

Nose cone
support dia. 8 mm
drilling: 5 mm
length: 27.5 mm

Nose cone
support dia. 28 mm
drilling: 21 mm
length: 51.5 mm

Rockwell penetrator
with MPA - certificate
Length: 28 mm
Ø 6.5 mm

Ball holder
with MPA - certificate
1/16" mm ball pressed-in
length: 28 mm
Ø 6.5 mm

V-Anvil
for N4A / N4B / N4C
für work pieces Ø 20 - 250 mm

Rockwell penetrator
with MPA - certificate
Length: 14 mm
Ø 8 mm

Rockwell penetrator
to nose cone N1PK01
Length: 14 mm
Ø 8 mm

Ball holder
with MPA - certificate
2.5 mm ball pressed-in
length: 28 mm
Ø 6.5 mm

Ball holder
with MPA - certificate
2,5 mm ball exchangeable
length: 28 mm
Ø 7 mm

Model name

Test loads

Peculiarities

Test anvil

Size

Standard support

Drive (z-axis)

Traverse path cross slide

Accuracy X-/Y-axes*

Nose cone

Area of support

Drilling

Measurement turret

Drive test unit

Work piece size

Test height

Throat depth

Max. work piece weight

Camera, Lens, Lighting

Camera resolution

Halogen lamp

LED lighting

Field of view general image camera

Software

Dimensions

Display

Basic machine (whd)

Machine base

Weight basic machine

Electric connector

Power supply

Frequency

Power consumption

Main fuse 220V

Main fuse 110V

Terms

Room temperature

Relative humidity

Safety class

N4A

147 - 1840 N
15 - 187.5 kgf

exchangeable test units or springsleeves

0 - 145 mm

85 mm

610 x 230 x 140

-
-

N4B

147 - 1840 N
15 - 187.5 kgf

exchangeable test units or springsleeves

0 - 235 mm

130 mm

700 x 290 x 140

-
-

N4C

147 - 1840 N
15 - 187.5 kgf

exchangeable test units or springsleeves

0 - 335 mm

180 mm

800 x 380 x 140

-
-

N4E

147 - 1840 N
15 - 187.5 kgf

exchangeable springsleeves

0 - 20 mm

110 mm

450 x 260 x 140

-
-

Products

N4 | Portable

Extranet

Offer

Brochures